Retrofits

Inova™ Torch Height Control by Kaliburn™

Literature (PDF)

Available only as a retrofit, the Inova™ torch height control by Kaliburn allows the user to program more functions and reduce cycle time along with providing an accurate cut. The Inova™ is available for any plasma system.

The Inova™ allows for high speed positioning. In addition one can produce more cut pieces per hour with the automatic gas initiator.

Inova™ Torch Height Control by Kaliburn™

The Inova's™ easy to program microprocessor provides many programmable functions:

• Arc voltage from 50 to 250 volts in .1 volt increments
• Manual travel speed
• Cutting height (torch moves to the cutting height after the pierce time is complete but before the AVC mode is activated)
• Plate sense speed during initial pierce height setting(IHA)
• High to low speed crossover point during IHS
• Plasma gas preflow during IHS-on/off
• Adjustable gain
• IHS test/run (test the initial pierce height without starting the plasma torch
• Up to 8 torch stations
• Collision protection system with auto height correction
• Maximum reaction speed-600 ipm
• Optional remote control with touch screen interface
• RS-422 communication link
• Software servo control loop
• X/Y partial raise enable/disable for long distance traverses- returns torch to upper limit switch
• Arc voltage control limiter (prevents torch damage during kerf crossing)